澳洲10精准计划
Pres-On U6200 Series Urethane Foam Tapes are high density, open cell, urethane foam tapes with a double side coating of high-tack acrylic adhesive. These foam tapes exhibit excellent cushioning characteristics and apply easily to most clean, dry surfaces – even irregular rough surfaces. U6200 reduces the transmission of vibration, provides thermal insulation, and offers excellent mounting and holding strength.
澳洲10在线走势图
- Tech Specs
- Product Highlights
- Applications
- Available Options
| Standard Roll Sizes | Serial Number | Thickness | Length |
|---|---|---|---|
| All rolls available in widths from 3/16” to 54” | U6203 | 1/32” | 200' |
| U6206 | 1/16” | 100' | |
| U6212 | 1/8" | 50' |
| Adhesion Properties | Test | Typical Performance | Measurement Method |
|---|---|---|---|
| Dynamic Tensile Bond | 90 | PSI | |
| Dynamic Shear Adhesion (PSI) (180 peal adhesion stainless steel) | 95 | PSI | |
| Liner Side | 100 | oz/in | |
| Exposed Side | 85 | oz/in | |
| Temperature | -40 F to 200 F | degrees F | |
| Water and Humidity Resistance | Excellent | Pres-On | |
| Shelf Life | 1 year stored at room temperature |
| Physical Properties | Property | Test Method | Result |
|---|---|---|---|
| Density (lbs/cu ft) | ASTM D-882 | 30 lbs | |
| Hardness, Shore A | ASTM D-2240 | 28 | |
| Tensile Strength (PSI) | ASTM D-882 | 175 | |
| 100% Modulus (PSI) | ASTM D-882 | 85 | |
| Elongation % | ASTM D-882 | 350 | |
| Thermal Conductivity | Retention of tensile properties 2 weeks @ 185 F and 100% R.H. | 80% Minimum |
- High density, open cell, urethane foam tape
- Coated with high tack acrylic adhesive on both sides
- Uniform cell structure and excellent dimensional stability
- Resists moisture, dust, and contaminants
- Excellent compression set resistance
- Low thermal conductivity, retards heat flow
Pres-On U6200 Series Urethane Foam Tapes are used for the mounting of interior signs, nameplates, wire clips, electrical channels to walls, air fresheners, soap dispensers, acoustic panels to walls, and provides vibration dampening for electronic components. These tapes can also be used in industrial assembly applications as an alternative to traditional fasteners.
- Signage
- Graphics
- Exhibits & Kiosks
- Wire Clips
- Vibration / Noise Dampening
- Electronic Equipment Components
- Soap Dispensers
- Air Fresheners
- Acoustic Wall {anels
- Nameplates
Application Notes
Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results.
- Release Liner: Brown Kraft Paper
- Custom die-cut shapes
澳洲10开奖app
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.